The Process to Make the Armor

More fun & productivity with

HOME | Signup FREE | Submit Articles | | Blog

The Process to Make the Armor - By: Mitch Johnson, Posted on: 2007-04-25

Iron and steel have become part and parcel of our daily life in this modern world. They are used in different ways and for different purposes these days. And here we are going to look at some of the ways in which iron and steel has been used from the ancient times as well.

Iron and Steel
Iron can be divided into two types: with little carbon content it becomes malleable and is steel or wrought-iron, and with more than the minimum of carbon remaining in its composition it is cast-iron and inclined to be brittle.

Probably the greatest use of the metal in the past was in the making of Armour and arms. Armour was used both for protection in battle and in jousting, and for ceremonial purposes. In the first instances it was designed not only to resist blows from lances and cudgels but to deflect them and upset the opponent's balance.

Ceremonial equipment on the other hand, displayed the art of the armourer to the best advantage and exhibited his prowess at ornamenting a suit in the most striking manner. Fine Armour of either type is now extremely rare outside museums, and even if it was available very few collectors have space in which to display it adequately. Embellishment takes the form of engraving, gilding, raised patterns, and damascening: inlay in gold and silver.

Swords and other hand weapons were often highly decorated; early ones of fine quality are rare, but seventeenth- and eighteenth-century examples can be found.

Firearms have received a great amount of study in the last few years, and the value of a good pistol has risen enormously. The subject is a very wide one and cannot be dealt with briefly. Mechanisms for firing the charge of gunpowder and ejecting the missile can be divided into recognizable types that make dating possible, but only within wide limits.

From the sixteenth to seventeenth centuries the powder was ignited by means of a wheel-lock, a hardened toothed wheel which attempted to strike sparks from a piece of flint comparable to a cigarette-lighter. Its successor, introduced early in the seventeenth century, was the flint-lock, in which a piece of flint gripped in steel jaws was sprung down on to the powder and ignited it as it struck the steel powder-pan.

This method endured until early in the nineteenth century, when a small cap, containing chemicals that detonated on being hit, known as a percussion cap, was invented. The cap was placed near the powder, and when the trigger was pressed the hammer fell and the cap exploded the gunpowder.

We have seen how iron and steel were used to show power through the armours of the kings and his soldiers that proves their might and power. We have also seen how the making process involved has progressed from the time it has been extensively.

Article Source: http://www.girlarticles.com

Mitch Johnson is a regular writer for www.mycollectablestips.info/ , www.ezcollectablesresources.info/